EKF - Short Profile
EKF - Short Profile


CB2-PIPE

3U, CompactPCI   5-Port USB 2.0 Host Controller
HTML documents available here
Description Product description in English
Ordered List
CB2-PIPE - USB 2.0 Host Controller
PDF documents available here
Product Information Product information in PDF format - English
Download photos in print quality

Photo Gallery
1 | 2 | 3 | 4 | 5
Print Quality 300dpi 10x15cm .JPG ©EKF

CB2-PIPE

CompactPCI   5-Port USB 2.0 Host Controller


The CB2-PIPE is a 5-port USB2.0 host controller. The 3U CompactPCI® board complies with the Universal Serial Bus Specification Revision 2.0 and Open Host Controller Interface (OHCI) Specification for full-/low-speed signalling and the Intel Enhanced Host Controller Interface (EHCI) Specification for high-speed data transfers. All downstream facing ports can handle high-speed (480Mbps), full-speed (12Mbps), and low-speed (1.5Mbps) transaction.


All USB power lines are protected against over-current and short circuit conditions. Four of five USB ports are accessible from the front panel. The fifth USB connector is situated on-board for system internal usage (e.g. USB stick or USB cable attached device).
Any popular operating system provides suitable drivers for the CB2-PIPE. In addition, any recent BIOS allows to boot from an USB device via OHCI or high speed EHCI data transfer modes.

CB2-PIPE - USB 2.0 Host Adapter

CB2-PIPE - USB 2.0 Hostadapter

Feature Summary
  • 3U Eurocard (100x160mm2)
  • Front panel width 4HP
  • Peripheral Card 32bit, 33MHz (133MBps), 3.3V or 5V interface
  • Ready for usage within PXI® systems
  • Root hub with 5 downstream facing ports, all ports over-current protected, data transfer rate up to 480Mbps, conforming to USB2.0, OHCI Rev. 1.0a, EHCI Rev. 1.0
  • Proven PCI to USB 2.0 controller NEC (Renesas) uPD720101
  • USB port 1-4 wired to front panel type A connectors
  • USB port 1-4 optionally wired to J2 for rear I/O usage (front panel connectors USB1-4 removed), stuffing option - please take into consideration before ordering
  • USB port 5 wired to the on-board type A connector
  • +5V ±5% 0.1A max. (w/o current required by USB devices via VBUS)
  • +3.3V +0.17V/-0.1V 0.4A max. (w/o on-board Flash disk drive option)
  • Vio 3.3V/5V 0.1A max.
  • Operating temperature: 0°C to +70°C • industrial temperature range on request
  • Storage temperature: -40°C to +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • MTBF 0.333 * 106h
  • Coating, sealing, underfilling on request
  • RoHS compliant 2002/95/EC
  • EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
subject to change
Ordering Information
Please refer to the ordered list for popular CB2-PIPE SKUs
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail